Sparklabs Wolf Engine is a new and innovative HPA device based on the latest generation technologies.

The most significant feature is the electromagnetically powered nozzle.

Multiple shots from a tank. The Wolf device was designed from the ground up to be as efficient as possible.

Sparklabs therefore developed their electromagnetic nozzle so that it does not use air to recharge.

The valve is further designed not to waste air after the pellet has left the barrel and at the same time be really accurate.

For example, the developer managed to get over 6500 shots from a 0.8 liter canister at 121m/s with 0.2g pellets.

The special adjustable pellet pusher is excellent, which allows easy assembly on countless replicas of different brands.

Both the device and the FCU control unit have been designed to be installed as simply as possible.

Compatible for shotguns with Gearbox version 2.

_ FOR MAINTENANCE:

Generally the Wolf system does not require any maintenance below 100,000 - 300,000 strokes and we recommend opening the engine only if there are problems or if the Wolf behaves worse than usual.

Steps to re-grease the engine:

- remove the engine from the gearbox

- unscrew the nozzle with the key provided in the kit

- the entire assembly will be extracted from the engine

- add a small amount of silicone grease in the area behind the magnets

- close, pushing everything back and screw the nozzle (ball pusher) with the key provided, make sure that the nozzle is screwed in the same amount as before (by default the tip of the nozzle is 19 mm from the engine).

Package included:

• Wolf engine System 
  
• Fire Control Unit (FCU)
• Cable
• Click HERE for the installation manual.